It has come to our attention that many people have been purchasing counterfeit units from either China or Zelenograd, Russia. People send us many emails requesting training, support and software updates because after having purchased from unauthorized dealers of Vector NLS Biofeedback they do not hear back from those parties when support is needed.

The certificates which these unauthorized dealers use are outdated and not valid. They only use them as a front to seem legitimate.
Please be aware, if you purchase a system, which does not come from this website or one of our authorized distributors (which we can help you locate), we will not support the system or software.

It greatly distresses us that our name and reputation are being used in this manner. Customer service is of great importance to us and so it is vital that we let any potential customer know that they need to ensure that they are buying the real deal.

There is a name which a Chinese company is using to sell counterfeit Vectors: 8D LRIS
This is not our unit and we will not support it in any way. Our older video training was taken, without our permission, and the outdated software, which they have also stolen, is not accurate or effective.

We own the right to Vector NLS Biofeedback and have a trademark for this name, while we are working to address this theft please we aware and feel free to ask us any questions.

VectorNLS-T-01__NoticeOfPublicationLetterVectorNLS-T-01_NoticeOfPublication

VectorNLS-T-01_Registration

Please see below emails from people who were under the impression that they purchased our Vector system and needed our support. We were not able to extend support until they purchased our original device. The information in bold at the end are our responses to these email situations.

Email #1
Hello, I have the 8D LRIS System and have a few questions:
1. I can install the vector software but I do not have the TFORMMENU.victor.jpg file. Can you please email the file, or is there a link to download the program?
2. What is the main difference between the Vector03 program and the VectorExpert? Is it ok to use both?
3. In the administrator section you can change the speed from Very Fast, Fast, Medium etc. Is it ok to use the very fast speed?
4. Is there a manual that explains how to use the Vector03 program?
5. What is the cost to order an additional headset?
6. What is the cost of ordering additional headset ear protectors?
7. Is there a website the host additional training videos?

Thank you,
Kevin

NOTE – This young man obviously bought the fake system and it is tough to have to tell him that we don’t support this system.

Email #2
HI
I have just purchased the 8d-lris from DOLMA INDUSTRY LTD. in CHINA. Having just found your web site, I was wondering, as I didn’t buy the machine from your company do you know if this a copy (good or bad) of the Vector system.
I have been taken by this machine after being tested on the asyra system and another biofeedback machine (not sure of name)
Initially I bought for personal use and family friends, but was wondering if any of your distributors deal in Scotland UK. as I was wondering the potential to sell.
I would be interested to know if you have any training in UK, if so could you put me in touch?
Could you also answer these questions?
1. Do you have training manuals?
2. Do you have product brochures?
3. Can you feed individual frequencies into machine
4. My daughter has had cancer. Do you have a protocol to access if the cancer is still lurking in her body (I’ve got a feeling that it is) please advise.
5. Do you have updates on the system?
6. Is there a protocol for a general run over of the client to show vitamin deficiency, hydration level, toxin levels, radiation levels, areas of weakness?
7. Can you rate the 8d-lris to other systems/machines?
8. Any add ons you would recommend if any?

As I have just bought this machine I do not now its full potential, so I apologize with these questions but knowing its full potential makes me want to learn quicker.

I look forward to your early response

Kind regards,
James

NOTE – This one was particularly hard for us. It is an example of how these fake companies are profiting off of someone else’s pain. Please make sure that you are only purchasing from one of our official sites.

Email #3
Dear Dr. Anna,
I have recently purchased an LRIS NLS8 bioresonance equipment.
I have been interested in bio resonance treatment for the last 7 years.
I am very much impressed with LRIS NLS8 but I have some questions on operation.
1- How often I can use the LRIS NLS8 on the same person and up to how many organs can I trewat at one session?
2- Can I apply treatment on different group of systemic organs on successive days? For examole, digestive one day, the eye the next day and the circulatory system,the following day?
3- In food section I have confusions. If the foods have smaller numbers, does it mean that they are good for you? The instrument has a data bank of frequencies for many food materials. For example, if we take tomatos, there is a frequency for it. This must be measured for a tomato, which was grown in Russia or Ukraşne and most probably in a greenhouse. Shall a tomato which is grown on the mountains of Turkey or China have the same frequency or must we masure it by placing it into the cup? Do you have a video or text on food and allergy you can forward me?
4- I am familiar with acupuncture and meridians. Can I select the Frontal meridians or or a single meridian such as the lug meridian and apply meta therapy? Will treating the meridian be beneficial to the organ?
5- In some literature, 8D is said to give information about cancver cells. How can we differentiate between the normally degenerated cell and a malignant cancer cell?

I hope my questions are not very confusing.
Thank you for your help in advance.
Best Regards
Dr. Gunay Apak
Istanbul Turkey

NOTE – Here again you can see that these fake companies appear to be legitimate when first visited. They have stolen information straight off our site and while we are working with the authorities to ensure that this stops, please use only the sites listed above.

Email #4
Dear Ladies and Gentlemen
I am using a 8D LRIS NLS machine as a beginner and have some questions. In the group of psychic diseases there are many emotions like fear, lack of confidence ect. but I cannot find there the emotion of hate, anger, grieve, guilt, blindness, no love upset ect. which are of great interest to me. How can I treat and heal these emotions??

The second point is can you give me a procedure for a correct way of finding a disease and of how to treat and heal it.
Thanks very much for your help
all the best
Oswald

NOTE – As you can see these companies are also promising things that are not real. Biofeedback does not detect disease and emotions. Biofeedback technology allows the technician to read your body’s reactions to certain stimuli. Biofeedback itself is a tool.

Email #5
Titusville, Florida, USA
Alibaba
Hello, I bought 3D NLS system last year, used it for diagnostic and treatment. But the system came with only 6 pages of “instructions” in very bad English, so I never figured out how to use it completely. The system 8D lris nls seems like an advanced version of the one I own as it addresses emotions among others. I am considering buying it. But before I buy, I have questions: what kind of instructions or training o you provide? Do you sell the machine too or I have to buy it from china? Thank you!

NOTE – WE DO NOT sell this machine and you do not have to buy a machine form China. While we have distributors all over the world they are all connected to our home company. Contact us through our website listed above and we will make sure that you speak to one of our distributors.

Email #6
Hello. I bought 8D-LRIS device but I have a problem with not enough of practical information. The only helpful information was on your video. If you have a chance can you send me more videos with different procedures, it will be very helpful.

Thank you. Alex

NOTE – If you see a unit that claims to be a Vector unit one of the give a ways that it is not our unit is a lack of information. We here at Vector provide our clients with the most up-to-date information regarding all of our machines.

Facebook IconTwitter Icon